MOV AX, loc16
6-161
MOV AX, loc16
Load AX
SYNTAX OPTIONS
OPCODE
OBJMODE
RPT
CYC
MOV AX, loc16
1001 001A LLLL LLLL
X
−
1
Operands
AX
Accumulator high (AH) or accumulator low (AL) register
loc16
Addressing mode (see Chapter 5)
Description
Load accumulator high register (AH) or accumulator low register (AL)
register with the 16-bit contents of the location pointed to by the “loc16”
addressing mode, leaving the other half of the accumulator register
unchanged:
AX = [loc16];
Flags and
Modes
N
The load to AX is tested for a negative condition. If bit 15 of AX is 1, then
this flag is set; otherwise it is cleared.
Z
The load to AX is tested for a zero condition. The bit is set if the operation
results in AX = 0, otherwise it is cleared
Repeat
This instruction is not repeatable. If this instruction follows the RPT
instruction, it resets the repeat counter (RPTC) and executes only once.
Example
MOV AH, *+XAR0[0]
; Load AH with the 16-bit contents
; of location pointed to by XAR0.
; AL is unchanged.
SB NotZero,NEQ
; Branch if contents of AH were non
; zero.
Содержание TMS320C28x
