Introduction
3
SBVU049 – November 2018
Copyright © 2018, Texas Instruments Incorporated
TLV767EVM-014 Evaluation Module
1
Introduction
Texas Instruments' TLV767EVM-014 EVM helps design engineers evaluate the operation and
performance of the TLV767 family of linear regulators for possible use in their own circuit application. This
particular EVM configuration contains a single linear regulator. The regulator is capable of delivering up to
1 A to the load. For stability, use a 1-µF (or larger) output capacitor for the TLV767.
1.1
Before You Begin
The following warnings and cautions are noted for the safety of anyone using or working close to the
TLV767EVM-014. Observe all safety precautions.
Warning
Warning hot surface. Contact may cause burns. Do not touch.
CAUTION
The circuit module may be damaged by over temperature. To avoid damage,
monitor the temperature during evaluation and provide cooling, as needed, for
your system environment.
CAUTION
Some power supplies can be damaged by application of external voltages. If
using more than one power supply, check your equipment requirements and
use blocking diodes or other isolation techniques, as needed, to prevent
damage to your equipment.
