36
TI-RGB Array Commands
Command:
CONNECT RGB AS LAMP
Command
Syntax:
CONNECT RGB AS LAMP
Code
Sample:
Send "CONNECT RGB AS LAMP"
Range:
N/A
Describe:
This command will enable the “high brightness” mode of the TI-RGB
Array as long as an external power source (like the USB battery) is
connected to the
PWR
port.
Note:
“AS LAMP” will need to be typed in.
Result:
The TI-RGB Array is now configured to be in high-brightness mode.
If the external power is not connected, the “
AS LAMP
” has no effect
– i.e. the brightness will be at the default level. Also note, an error
will be indicated by a beep tone.
Type or
Addressable
Component:
All components of the TI-RGB Array.
See Also:
New Commands to use with TI-RGB Array
SET RGB
Command:
SET RGB n r g b
Command
Syntax:
SET RGB n r g b
SET RGB eval(n) r g b
Code
Sample:
Send "SET RGB 1 255 0 255"
Range:
0-15 for 'n', 0-255 for r,g,b
Describe:
The SET RGB command controls the brightness and color of each
RGB LED in the TI-RGB Array
Result:
The specific LED lights up with the specified color
Type or
Addressable
Component:
All components of the TI-RGB Array
See Also:
New Commands to use with TI-RGB Array
See Also:
