3. Insert the free end of the
cable (the "
A
" connector) into
a USB port on the computer.
The power LED on the Hub
glows green to show that it is
receiving power.
TI-RGB Array Commands
Prerequisite: Use the Send "Connect RGB" Command First
The "
CONNECT RGB
" command needs to be used first when using the TI-RGB Array.
The "
CONNECT RGB
" command configures the TI-Innovator™ Hub software to work
with the TI-RGB Array.
It establishes the connections to the various led binary slots on the TI-RGB Array – 0
through 15 RGB LED. It also clears the various counters and sensor values.
For additional commands see:
CONNECT RGB
Command:
CONNECT RGB
Command
Syntax:
CONNECT RGB
Code
Sample:
Send "CONNECT RGB"
Range:
N/A
Describe:
The "
CONNECT RGB
" command configures the TI-Innovator™ Hub
software to work with the TI-RGB Array.
Result:
Connects the TI-RGB Array to the TI-Innovator™ Hub.
The TI-RGB Array is now ready to be programmed
Type or
Addressable
Component:
All components of the TI-RGB Array.
See Also:
New Commands to use with TI-RGB Array
TI-RGB Array Commands
35
