Texas Instruments TAS5753MDEVM Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 29

Texas Instruments TAS5753MDEVM Скачать руководство пользователя страница 7

Using the TAS5753MDEVM with PurePath Console 3

7

SLAU683 – May 2016

Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

TAS5753MD Evaluation Module

Figure 5. TAS5753MDEVM Audio Processing Windows

Stereo/Mono device selection

Configure each device of the EVM individually by selecting between

Stereo

and

Mono

on the upper right section of the

Audio Processing

window. The configuration of each

device is made with the same controls; the only difference is that when configuring the
mono device, the channel (left or right) driving the power stage is selected. Detailed
information is found in the

Configuration

section.

Configuration

Access the configuration menu by clicking in the gear icon next to the

Stereo/Mono

selection

button. In Stereo mode, only the option to reset the tuning done in the GUI

is offered, in mono mode, the user can select also if the left or right channel from the
digital audio processor drives the power stage of the amplifier. When performing the
Reset tuning function, the devices are configured with the default settings. By default,
both devices are configured with a master volume gain of –10 dB, multiband AGLs are
set to 0 dB while full band AGL is set to –1 dB. Stereo device equalizers are turned off,
but mono device has a default-configured 120-Hz low-pass filter for use in subwoofer
applications. The left channel of the mono device is driving the power stage by default.

Audio I/O shortcut

This section shows the audio source and sampling frequency that is used to generate
the I²S input for the TAS5753MD amplifiers. The user is redirected to the main Audio
I/O window after clicking this button.

Audio Player

The Audio Player is used to play audio tracks available in the PC and perform various
tuning operations. Clicking on the Audio Player launches a floating window, where
audio tracks are added or played.

«
...
5
6
7
8
9
...
»

Содержание TAS5753MDEVM






























Отзывы:

Нет отзывов