Texas Instruments TAS5753MD Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 28

Texas Instruments TAS5753MD Скачать руководство пользователя страница 5

Using the TAS5753MDEVM with PurePath Console 3

5

SLAU683 – May 2016

Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

TAS5753MD Evaluation Module

3.2

TAS5753MD Application Features

The

Home

window is displayed when the TAS5753MD application is initialized. Several evaluation and

integration options are available. TI recommends using the application walkthrough by clicking on the
question mark icon available next to the page name in all pages. The application walkthrough feature
provides guidance through various sections in the selected page and displays comments explaining the
sections of the page. Close the application walkthrough at any time by clicking on the ‘x’ mark at the top
right corner of the pop up. Navigate through the previous and next sections in the page by clicking on the
left or right arrows.

Figure 4. TAS5753MD Application Home Window

3.3

Hardware Checks

The following window verifies the correct connection of the evaluation module, checking if the hardware is
correctly configured to test the EVM.

Perform a system calibration before proceeding to the

Tuning and Audio Processing

window. If an attempt

to enter the

Tuning and Audio Processing

window is made before performing hardware checks, PPC3

prompts with a window requesting to perform the verification of the hardware. Only new sessions require a
hardware check, so this window will not appear when continuing from a previous session or loading a
previously saved one.

«
...
3
4
5
6
7
...
»

Содержание TAS5753MD





























Отзывы:

Нет отзывов