Using the TAS5733LEVM with PurePath Console 3
11
SLOU439 – March 2016
Copyright © 2016, Texas Instruments Incorporated
TAS5733L Evaluation Module
All the multiband AGL functions are also featured in the full-band AGL window. By default, –1 dB is
configured for full-band AGL and the attack and release rates are set to 10 V/ms.
Figure 8. Full-Band AGL
3.6
Register Map
This window is used to monitor and change the main registers of the amplifier.
The readings appearing on the registers are related to the selected device, that is, stereo or mono.
Manual changes to the register values is accomplished by double-clicking in the desired bit to change.
Clicking on
Read All Registers
allows monitoring of the register status of the amplifier. The
Fields
section
shows the register name and a brief description of each bit that affects the selected register.
3.7
Direct I²C
This tool manually reads and writes the registers of the amplifier. The
Direct I2C
window is also used to
monitor the changes made to the device registers using a logging functionality. The stereo device I²C
address of the EVM is 0x56, the mono device I²C address is 0x54.
Direct I2C
has two main tabs, I/O and Log, present in the top right corner of the window.
