Mono Setup
3
SLOU500 – December 2017
Copyright © 2017, Texas Instruments Incorporated
TAS2770YFF Evaluation Module
6
Mono Setup
Use the following instructions to complete the mono setup:
1. Install PPC3 with the TAS2770YFFEVM plug-in.
2. Connect a speaker to J10 on the EVM. Alternatively, J20 and J15 can be used for speaker
connections.
3. Attach a power supply to connector J9. There is also an alternate barrel jack connector (J19) adjacent
to this connector.
4. Set jumper J13 to select the desired I
2
C address for channel 1.
5. Connect the EVM to a Windows
®
7 or higher PC with a micro-USB cable (J16).
Figure 1. TAS2770YFF-REF1 Stereo Configuration