Mono Setup
3
SLOU495 – December 2017
Copyright © 2017, Texas Instruments Incorporated
TAS2770 Evaluation Module
ECCN: 3E991
5
Mono Setup
Use the following steps for mono setup:
1. Install PurePath Console 3 with the TAS2770EVM plug-in.
2. Connect a speaker to J10 on the EVM. Alternatively, J20 and J15 can be used for speaker
connections.
3. Attach a power supply to connector J9. There is also an alternate barrel jack connector (J19) adjacent
to this connector.
4. Set jumper J13 to select the desired I
2
C address for channel 1.
5. Connect the EVM to a Windows 7+ PC with a micro-USB cable (J16).
Figure 1. TAS2770EVM Stereo Configuration