Stereo Setup
7
SLOU462A – November 2016 – Revised March 2017
Copyright © 2016–2017, Texas Instruments Incorporated
TAS2559 Evaluation Module
5
Stereo Setup
1. Install PurePath Console 3 with the TAS2559EVM plug-in.
2. Connect speakers to both J44 and J8 on the EVM.
3. Attach a 5.0 V/ 5.0 A power supply to connector J29 (inner = 5V, outer = GND).
4. Connect the EVM to a Windows 7+ PC with a micro-USB cable (J23). It will enumerate as a USB-
AudioEVM device (sound card).
Figure 4. TAS2559EVM Stereo Setup
5. Proceed with characterization per the PPC3 User’s guide.
6. Change to channel B in the device control pane and set to Right Channel.
7. Play the test tone as shown in
.
