Mono Setup
4
SLOU462A – November 2016 – Revised March 2017
Copyright © 2016–2017, Texas Instruments Incorporated
TAS2559 Evaluation Module
4
Mono Setup
1. Install PurePath Console 3 with the TAS2559EVM plug-in.
2. Connect a speaker to J8 on the EVM.
3. Attach a 5.0 V/ 2.5 A power supply to connector J29 (inner = 5V, outer = GND).
4. Remove Jumpers J38, J47, J51, and J40.
5. Connect the EVM to a Windows 7+ PC with a micro-USB cable (J23). It will enumerate as a USB-
AudioEVM device (sound card).
Figure 1. TAS2559 EVM Mono Setup