manualshive.com logo in svg

Texas Instruments NS/CLM/1L1/B - NSpire Math And Science Handheld Graphing Calculator, Руководство пользователя, Страница: 27 / 144

Поделиться
Скачать
Texas Instruments NS/CLM/1L1/B - NSpire Math And Science Handheld Graphing Calculator Скачать руководство пользователя страница 27

Getting Started

19

Connecting the TI-Nspire™ handheld to a computer  

Upgrading the Operating System

You can upgrade the OS on your TI-Nspire™  handheld using your 
computer and TI-Nspire™ Computer Link Software. You can also transfer 
the OS from one handheld to another.

Warning:

 Upgrading the operating system will delete all TI-84 

applications and files. Before installing an OS upgrade, you should use TI 
Connect to back up all TI-84 applications and files to a computer. You can 
copy them back to the handheld when the OS upgrade is complete.

If there is not enough room on the receiving handheld for the upgrade, 
the sending handheld is notified. The only time documents can be 
affected by an OS installation is if the receiving handheld has a corrupted 
OS. In this situation, documents may be affected by OS restoration. It is a 
good practice to back up your important documents and folders before 
installing an updated operating system.

See the important information below concerning batteries before 
performing an OS upgrade.

Important Operating System download information

It is always a good practice to install new batteries before beginning an 
OS download.

When in OS download mode, the Automatic Power Down

TM 

(APD) 

feature does not function. If you leave your handheld in download mode 
for an extended time before you begin the downloading process, your 
batteries may become depleted. You will then need to replace the 
batteries with new batteries before downloading.

Where to get Operating System upgrades

For up-to-date information about available OS upgrades, check the Texas 
Instruments Web site at http://education.ti.com. 

1.

Firmly insert the mini-USB end 
of the cable into the port at the 
top of your handheld. 

2.

Firmly insert the USB end of the cable into the USB port of 
the computer.

Содержание NS/CLM/1L1/B - NSpire Math And Science Handheld Graphing Calculator

















































































































































Отзывы:

Нет отзывов