Texas Instruments MCT8316AEVM, Руководство пользователя

Страница: 15 / 22

3. Connect a micro-USB cable to the MSP430 LaunchPad and the PC.
4. Click on the Build Project icon or “Ctrl” + B to ensure the project builds successfully. Accept any updates if
needed from the Console.
5. Click on Debug Project to set up a debug session and press the Play button to run the code.
6. Stop the debug session, close Code Composer Studio, disconnect the SPI-by-Wire jumpers, and unplug the
micro-USB cable from the MSP430 LaunchPad.
Table 7-1. SPY-BI-Wire Connections Needed to Program MSP430FR2355
MSP430 LaunchPad
™
(eZ-FET Debug Probe Side) (J101) MCT8316AEVM 4-pin SPI-by-Wire Header (J4)
GND GND
3V3 3.3V
SBWTDIO SBWTDIO
SBWTCK SBWTCK
Figure 7-2. MSP430 LaunchPad
™
eZ-FET Probe Connected to MCT8316AEVM
www.ti.com MSP430FR2355 Interface Firmware
SLLU340 – AUGUST 2021
Submit Document Feedback
MCT8316AEVM Evaluation Module 15
Copyright © 2021 Texas Instruments Incorporated