background image

User’s Guide

LMX2571EPEVM Evaluation Instructions

ABSTRACT

The LMX2571EPEVM is designed to evaluate the performance of LMX2571-EP. This board consists of a
LMX2571-EP device.

The LMX2571-EP is a low-power, high-performance, wideband RF synthesizer that can generate any frequency
from 10 MHz to 1344 MHz. This synthesizer can also be used with an external VCO. The device runs from a
single 3.3-V supply and has integrated LDOs that eliminate the need for onboard low noise LDOs.

Except for the following components, this board is able to support extended temperature range testing.

• LED
• uWIRE socket
• Header and short
• Ribbon cable

Table of Contents

1 LMX2571EPEVM Evaluation Module

.....................................................................................................................................

3

1.1 Evaluation Module Contents..............................................................................................................................................

3

1.2 Installing the EVM Software...............................................................................................................................................

3

1.3 Resources..........................................................................................................................................................................

3

2 Setup

........................................................................................................................................................................................

4

2.1 Connection Diagram..........................................................................................................................................................

4

2.2 Power Supply.....................................................................................................................................................................

4

2.3 Reference Clock.................................................................................................................................................................

4

2.4 RF Output...........................................................................................................................................................................

4

www.ti.com

Table of Contents

SNAU182 – MARCH 2021

Submit Document Feedback

LMX2571EPEVM Evaluation Instructions

1

Copyright © 2021 Texas Instruments Incorporated

Содержание LMX2571EPEVM


























Отзывы: