Texas Instruments LMT01EVM, Руководство пользователя

Страница: 10 / 27

LMT01 Setup and Operation
www.ti.com
• SETUP Tab
– Serial Port: Manually select which serial port the LMT01EVM is connected to
– Firmware Revision: Check the firmware revision on the MSP430F5528 microcontroller
– Test LED: Toggle the red LED (D2) on and off
– One Shot Pulse Train Data: Single read shown in either pulse counts or temperature
– Select Pulse Train Measurement Method: Select from 12 methods of counting pulse with a
microcontroller. More details in
Section 4.2
– Comparator Low to High Threshold: Set the comparator threshold to determine a logic high
level
– Comparator High to Low Threshold: Set the comparator threshold to determine a logic low
level
Figure 9. Comparator Threshold
10 LMT01EVM SNIU027A – March 2015 – Revised October 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated