6 Appendix A - TICS Pro LMK5B33216 Software
6.1 Using the Start Page
The Start page can be used to configure the PLLs for specific VCO frequencies and DPLL operation.
Figure 6-1. Start Page Location
6.1.1 Step 1
Set up the XO_P input frequency and interface type. Set up the input to the APLL by specifying the reference to
each PLL and associated settings for PLL phase detector frequency.
6.1.2 Step 2
In Step 2, set up the clock input frequencies and the interface type. Cascaded APLLs can also be assigned from
this page using the PLL R-divider and phase detector preview to the right.
Figure 6-2. Step 1 and 2: XO Input and Clock Inputs
Appendix A - TICS Pro LMK5B33216 Software
32
LMK5B33216EVM User's Guide
SNAU263A – FEBRUARY 2022 – REVISED JULY 2022
Copyright © 2022 Texas Instruments Incorporated