background image

User’s Guide

LM74701-Q1EVM User Guide

ABSTRACT

This user’s guide describes the evaluation module (EVM) for TI's ideal diode controller, LM74701-Q1. This 
document provides configuration information and test setup details for evaluating LM74701-Q1 devices. An EVM 
schematic, board layout images, and bill of materials (BOM) are included.

Table of Contents

1 Introduction

.............................................................................................................................................................................

2

2 Setup

........................................................................................................................................................................................

2

2.1 I/O Connector Description..................................................................................................................................................

2

2.2 Board Setup.......................................................................................................................................................................

3

2.3 Schematic..........................................................................................................................................................................

4

3 LM74701-Q1EVM Performance Capture

...............................................................................................................................

5

3.1 LM74701-Q1EVM Startup..................................................................................................................................................

5

3.2 Startup Reverse Polarity (–12 V).......................................................................................................................................

6

3.3 ISO 7637-2 Pulse 1 Performance......................................................................................................................................

7

4 EVM Board Assembly Drawings and Layout Guidelines

....................................................................................................

8

4.1 PCB Drawings....................................................................................................................................................................

8

4.2 Bill of Materials...................................................................................................................................................................

9

5 Revision History

....................................................................................................................................................................

11

List of Figures

Figure 2-1. LM74701-Q1EVM Typical Application Circuit............................................................................................................

2

Figure 2-2. LM74701-Q1EVM......................................................................................................................................................

3

Figure 2-3. LM74701-Q1EVM Schematic....................................................................................................................................

4

Figure 3-1. LM74701-Q1EVM Startup.........................................................................................................................................

5

Figure 3-2. Startup Reverse Polarity (–12 V)...............................................................................................................................

6

Figure 3-3. Response to ISO 7637-2 Pulse 1..............................................................................................................................

7

Figure 4-1. LM74701-Q1EVM Top Side Placement.....................................................................................................................

8

Figure 4-2. LM74701-Q1EVM Bottom Side Placement...............................................................................................................

8

Figure 4-3. LM74701-Q1EVM Top Layer Routing.......................................................................................................................

8

Figure 4-4. LM74701-Q1EVM Bottom Layer Routing..................................................................................................................

8

List of Tables

Table 4-1. Bill of Materials............................................................................................................................................................

9

Trademarks

All trademarks are the property of their respective owners.

www.ti.com

Table of Contents

SNOU180A – JUNE 2021 – REVISED SEPTEMBER 2021

Submit Document Feedback

LM74701-Q1EVM User Guide

1

Copyright © 2021 Texas Instruments Incorporated

Содержание LM74701-Q1EVM


















Отзывы: