background image

User’s Guide

LM5169FQEVM EVM User Guide

ABSTRACT

The LM5169FQEVM is a 115-V DC/DC fly-buck regulator that employs synchronous rectification to achieve 
high conversion efficiency in a small footprint. The EVM operates over a wide input voltage range of 20 V to 
115 V (120 V absolute maximum) to provide a regulated 10-V output, 0.3A at 750-kHz switching frequency, 
and an additional 10-V, 0.3A floating output. The output voltage has better than 1.5% set-point accuracy 
and is adjustable using an external resistor divider. The module design uses the LM5169F-Q1 synchronous 
buck converter with wide input voltage range, wide duty-cycle range, integrated high-side and low-side power 
MOSFETs, advanced over current protection, and precision enable. With AEC-Q100 grade 1 automotive 
qualification, the LM5169F-Q1 is rated to operate over a junction temperature range of –40°C to +150°C.

Please note that for EVMs labeled as 

LM5168FQEVM

, that the LM5168F is installed and approximately one half 

of the load current is available from this device. Both EVMs are identical, except for the converter IC installed. 
For the LM5169F version, please contact your local Texas Instruments representative.

Table 1-1. EVM Configuration

EVM

CONVERTER IC

PACKAGE

LM5169FQEVM

LM5169F-Q1

8-pin SO package with PowerPAD (4.89 mm × 3.90 mm)

LM5168FQEVM

LM5168F-Q1

8-pin SO package with PowerPAD (4.89 mm × 3.90 mm)

www.ti.com

SNVU757 – JUNE 2021

Submit Document Feedback

LM5169FQEVM EVM User Guide

1

Copyright © 2021 Texas Instruments Incorporated

Содержание LM5168FQEVM




















Отзывы: