Kit Contents
3
SPRUI11B – January 2015 – Revised March 2019
Copyright © 2015–2019, Texas Instruments Incorporated
LAUNCHXL-F28069M Overview
Figure 1. LAUNCHXL-F28069M Board Overview
2
Kit Contents
The LAUNCHXL-F28069M LaunchPad experimenter kit includes the following items:
•
C2000 LaunchPad Board (LAUNCHXL-F28069M)
•
Mini USB-B Cable, 0.5m
•
Quick Start Guide
2.1
Revisions
The first and only production released of the LAUNCHXL-F28069M in 2014 was revision 1.2.
All Revisions:
•
Resistor R7 in the oscillator circuit is incorrectly placed or should not be installed. This resistor may
impact startup time or robustness of the clocking circuit over the full operating range of the MCU or
different physical layouts of this circuit. The probability is low that this resistor will have any impact on
the functionality of this EVM as is not intended to be operated outside of Standard Temperature and
Pressure in a lab or prototype environment. Do not use this circuit as reference. For more information
on the Follow the requirements for the oscillator schematic, see the device-specific data sheet.
3
Installation
The F28069M LaunchPad is supported in both Code Composer Studio and Energia. Depending on your
tools preference you may wish to install one or the other or both.
3.1
Energia
Go to Energia.nu and and click on the Guide tab. Click on the link for your operating system and follow the
directions to install Energia.