Resources
20
SLAU772A – June 2018 – Revised March 2020
Copyright © 2018–2020, Texas Instruments Incorporated
MSP430G2553 LaunchPad™ Development Kit (MSP
‑
EXP430G2ET)
Figure 15. When CCS Has Found the Project
Sometimes CCS finds the project but does not show a checkmark; this might mean that your workspace
already has a project by that name. You can resolve this by renaming or deleting that project. Even if you
do not see it in the CCS workspace, be sure to check the workspace directory on the file system.
4.1.3
IAR Embedded Workbench for 430 IDE
IAR Embedded Workbench for MSP430 (IAR EW430) is another very powerful integrated development
environment that allows you to develop and manage complete embedded application projects. It integrates
the IAR C/C++ Compiler, IAR Assembler, IAR ILINK Linker, editor, project manager, command line build
utility, and IAR C-SPY
®
Debugger.
You can learn more about IAR Embedded Workbench for MSP430 and download it at the
.
IAR EW430 v7.11.1 or higher is required. To open the demo in IAR EW430, click
File>Open>Workspace…, and browse to the *.eww workspace file inside the \IAR subdirectory of the
desired demo. All workspace information is contained within this file.
The subdirectory also has an *.ewp project file. This file can be opened into an existing workspace by
clicking Project>Add-Existing-Project….
Although the software examples have all of the code required to run them, IAR EW430 users can
download and install MSPWare, which contains MSP430 libraries and the TI Resource Explorer. These
are already included in a CCS installation (unless the user selected otherwise).
4.2
LaunchPad Development Kit Websites
More information about the LaunchPad development kit, supported BoosterPack plug-in modules, and
available resources can be found at:
•
: Resources specific to this particular LaunchPad development kit
•
: Information about all LaunchPad development kits from TI
