![Texas Instruments InterActive! Скачать руководство пользователя страница 5](http://html.mh-extra.com/html/texas-instruments/interactive/interactive_getting-started-manual_1097128005.webp)
Getting Started with TI InterActive! 5
TII_GettingStarted.doc Getting Started with TI InterActive! Karen Davis Revised: 8/22/03 12:20 PM Printed: 8/25/03 8:04 AM Page 5 of 64
The PC that you use to run TI InterActive! must have:
•
Microsoft® Windows® 98, Windows 2000, Windows ME,
Windows NT®, or Windows XP.
•
Microsoft Internet Explorer 5.5 or later.
•
Available RAM: 16 MB for Windows 98 (20 MB RAM
recommended), 32 MB for Windows ME or Windows NT, 64
MB for Windows 2000, or 128 MB for Windows XP.
•
A hard disk with available storage space: 19 MB for
TI InterActive! and 45–111 MB for Internet Explorer
(depending on installation type).
•
A CD-ROM drive (if installing from a CD).
•
A video monitor with VGA or better resolution.
•
A mouse or mouse-compatible pointing device.
To use the Internet features of TI InterActive!, your PC must have
a working Internet connection.
To read the electronic documentation, Acrobat Reader 3.02 or
later is also required (16 MB disk space required).
To transfer programs and data between TI InterActive! and a
supported graphing handheld, or to collect samples from a
Calculator-Based Laboratory™ (CBL™), or Calculator-Based
Laboratory 2™ (CBL 2™), or Calculator-Based Ranger™ (CBR™),
your PC must have:
•
TI Connect™ 1.3.0.1 (11 MB disk space required).
•
An available USB port or a serial communication port
configured as Com 1, 2, 3, or 4. You also need the appropriate
TI Connectivity Cable — USB for Mac/Windows, Serial for
Windows (black), or Serial for Mac/Windows (gray).
Installing TI InterActive!
TI InterActive!
can be installed from a TI InterActive! CD-ROM
or from a file downloaded from the Web. Check the system
requirements below, and follow the steps for the installation
method that applies to you.
System
requirements