Texas Instruments FPC401, Руководство пользователя

Страница: 8 / 23

FPC401 EVM GUI Description and Setup
www.ti.com
8 SNLU222B – December 2016 – Revised September 2019
Submit Documentation Feedback
Copyright © 2016–2019, Texas Instruments Incorporated
FPC401 and FPC402 Evaluation Module (EVM) User’s Guide
2.3 Local FPC Read and Write
To read and write to local FPC registers, select the Local Reads and Writes tab. Select the instance
number and register offset address to be read or written to. To write, select a value using the radio boxes
in the
WRITE COMMAND section or type the desired hex value and click EXECUTE WRITE . To read,
click EXECUTE READ . The RESET FPC REGISTERS button will reset the instance's local FPC registers.
Note that performing a register reset in I2C mode will restore the default I2C address of the device and the
link must be closed and reopened to restore normal GUI operation.
Figure 8. FPC401 GUI – Local Reads and Writes