GUI Operation
Figure 10. GUI Splash Screen
7. After the splash screen is displayed the main window will open. Note: Only one instance of the GUI
may be open at a time!
Figure 11. GUI Introduction Page
3.2
Connecting the EVM
Follow these steps to connect the EVM to the GUI:
1. Attach the EVM to the computer via a micro USB cable
2. The GUI always shows the connection status on the bottom left corner of the GUI
12
FDC2114 and FDC2214 EVM User’s Guide
SNOU138 – June 2015
Copyright © 2015, Texas Instruments Incorporated