Texas Instruments DVEVM, Руководство по началу работы, Страница: 55 / 70

Setting Up a TFTP Server
Additional Procedures A-11
A.4 Setting Up a TFTP Server
You can check to see if a TFTP server is set up with the following
command:
host $ rpm -q tftp-server
If it is not set up, you can follow these steps:
1) If you have not yet installed MontaVista Linux Demo Edition (see
Section 4.3.1), you can download a TFTP server for your Linux host
from many locations on the Internet. Search for "tftp-server".
2) To install TFTP, use this command, where
-#.##-#
is the version
number portion of the filename:
host $ rpm -ivh /db/ztree/useracct/tftp-server-#.##-#.rpm
You should see the following output:
warning: /db/ztree/useracct/tftp-server-#.##-#.rpm:
V3 DSA signature: NOKEY, key ID 4f2a6fd2
Preparing... #################################### [100%]
1:tftp-server ################################### [100%]
3) Confirm that TFTP is installed with this command:
host $ /sbin/chkconfig --list
You should see the following output. Note that TFTP is at the end of
the list.
xinetd based services:
krb5-telnet: off
rsync: off
eklogin: off
gssftp: off
klogin: off
...
sgi_fam: on
rexec: off
rlogin: off
rsh: on
telnet: on
tftp: off
If you need to turn off the TFTP server, use this command:
/sbin/chkconfig tftp on
The default root location for servicing TFTP files is /tftpboot.