Texas Instruments DS22EV5110-EVKC, Руководство пользователя

Страница: 6 / 16

Bill of Materials
www.ti.com
7 Bill of Materials
Table 2. DS22EV5110-EVKC Bill of Materials
Reference Qty Description
Receiver Board
C70, C72, C73, C75, C77, C80 6 0.1 uF ±5% Ceramic Capacitor 0402
C71, C74, C76, C78 4 0.01 uF ±5% Ceramic Capacitor 0402
C6 1 0.1 uF ±5% Ceramic Capacitor 0603
C79 1 2.2 nF +±% Ceramic Capacitor 0603
C67, C99 2 1.5 uF ±5% Ceramic Capacitor 1206
C68 1 33 uF ±5% Tantalum Capacitor 3528
C69 1 68 uF ±5% Tantalum Capacitor 3528
D6 1 LED Green Right Angel
D7 1 LTST-C155KGJSKT (Orange/Yellow) Dual LED
R32 1 453
Ω
±5% Resistor 0402
R33 1 10 k Ω ±5% Resistor 0402
R34, R35 2 220 Ω ±5% Resistor 0402
R103, R104 2 4.7 k Ω ±5% Resistor 0603
R9, R10, R11, R12 4 10 k Ω ±5% Resistor 0603
R31 1 24 k
Ω
±5% Resistor 0603
R56 1 12 k Ω ±5% Resistor 0603
R36 1 3.3 k Ω ±5% Resistor 0603
J33 1 HDMI Receptacle Female 210008715-040
JR3, JR4 2 RJ45
J31 1 DC Power Jack 1.8 mm
J29, J30 2 1 pin header
JP27, JP28, JP33, JP38, JP39 5 1x2 pin header
JP12, JP13, JP14, JP22 4 1x3 pin header
U3 1 PCA9517D Philips Semiconductor I2C Buffer
U13 1 Texas Instruments DS22EV5110
U12 1 Texas Instruments LP3965 – 3.3V -1500 mA
U14, U15 2 94HBB08RAT Rotary Dip Switch
Passive Driver Board
JR1, JR2 2 RJ45 Jack
J1 1 HDMI Receptacle Female
8 Board Design Considerations
• Use one RJ45 jack for all TMDS signals in order to minimize the inter-pair skew.
• Use another RJ45 jack for the rest of the control pins, plus at least one ground connection between
two boards to set the common ground.
• Use pin 3 and pin 6 on the RJ45 jack for the TMDS clock path.
6 DS22EV5110-EVKC HDMI Extender Demo Kit for CAT5 Cables SNLU016A – October 2009 – Revised October 2013
Submit Documentation Feedback
Copyright © 2009–2013, Texas Instruments Incorporated