Test Points
PCB
6
SLVU574B – September 2011 – Revised July 2019
Copyright © 2011–2019, Texas Instruments Incorporated
DRV8803/04/05/06 Evaluation Module
2.1
Test Points
Every pin on the DRV88xx device has been brought out to a test point, and labels on the silkscreen
identify each signal. These are Kelvin connections and are not meant to be used to drive high currents.
These can be used as a sense line.
For those pins that change functionality depending on the respective device being used, a table is
provided with corresponding function name on its particular column.
Figure 2. Test Points
