The Windows Application
28
SLVU574B – September 2011 – Revised July 2019
Copyright © 2011–2019, Texas Instruments Incorporated
DRV8803/04/05/06 Evaluation Module
Figure 32. Help Window
Figure 33. About Window
4.6
DRV880x GPIO Control Signals
Once the application is communicating with the interface board, the control signals can be actuated by
clicking on pins to send each control hi (green), lo (red), or in special cases open (orange). Each tab will
have a different set of control signals depending on the device being interfaced with.
Functionality of control signals is identical across the platform. A green pin translates to a HI level on the
respective control signal, a red pin translates to a LO level on the respective control signals, and in special
cases, an orange pin translates to an open signal, and a gray pin translates to a non-control pin.
