Texas Instruments DRV8328 EVM Series, Руководство пользователя, Страница: 6 / 29

Figure 3-3. DRV8328AEVM on headers J1/J3 and J2/J4 of LaunchPad
Figure 3-4. Micro-USB plugged into LaunchPad
3.3 LED Lights
There are LED indicators on both the LAUNCHXL-F280049C and DRV8328AEVM when power is provided and
the micro USB cable is plugged in to the LaunchPad.
The DRV8328AEVM has 4 status LEDs on the board. By default, the PVDD and AVDD LEDs will light up when
the board is powered on. The fault LED will light up when the driver reports a fault, and the MCU LED (tied to
GPIO59) can be used for debugging and validation.
Table 3-1 shows the LED descriptions, with the LEDs that
Hardware and Software Overview www.ti.com
6 DRV8328xEVM User's Guide SLVUCD3A – NOVEMBER 2021 – REVISED AUGUST 2022
Submit Document Feedback
Copyright © 2022 Texas Instruments Incorporated