Texas Instruments DRV821 EVM Series, Руководство пользователя, Страница: 1 / 16

User’s Guide
DRV821xEVM and DRV8220EVM User's Guide
ABSTRACT
This document is provided with the DRV82xx family customer evaluation modules (EVM) as a supplement to the
DRV8210, DRV8212, and DRV8220 data sheets. This user's guide describes the hardware implementation of
the EVM.
CAUTION
Hot surface . Contact may cause burns. Do not Touch.
DRV8210EVM and DRV8212EVM are rated for power supply voltages between 1.65 VDC and 11
VDC max. The DRV8210 can support peak output currents up to a maximum of 1.6 ADC and the
DRV8212 can support peak output currents up to a maximum of 4 ADC. To maintain component
temperatures below the 130°C rating of the printed circuit board material, TI requires that the
continuous current of both channels be limited to
0.9 A-RMS when operating for extended periods of
time at an ambient temperature of 25°C.
Table of Contents
1 Introduction ............................................................................................................................................................................. 3
2 Power Connectors .................................................................................................................................................................. 3
3 Test Points ............................................................................................................................................................................... 5
4 MODE/nSLEEP Jumper and Speed-Adjustment Potentiometers ....................................................................................... 6
4.1 PH/EN Control Mode (MODE=Logic High)........................................................................................................................ 7
4.2 PWM Control Mode (MODE = Logic High, DRL, PDSG)................................................................................................... 8
4.3 Independent Half-Bridge Control Mode (MODE=Hi-Z)....................................................................................................... 9
5 Current Sensing .................................................................................................................................................................... 10
6 Operation of the EVM ............................................................................................................................................................ 11
6.1 Dual Motor Operation....................................................................................................................................................... 11
6.2 Single Motor Operation.................................................................................................................................................... 13
7 Removing and Installing Supported Motor Drivers ........................................................................................................... 14
8 Revision History ................................................................................................................................................................... 15
Trademarks
MSP430 ™ and eZ-FET ™ are trademarks of Texas Instruments.
All trademarks are the property of their respective owners.
www.ti.com Table of Contents
SLOU540A – NOVEMBER 2020 – REVISED DECEMBER 2020
Submit Document Feedback
DRV821xEVM and DRV8220EVM User's Guide 1
Copyright © 2020 Texas Instruments Incorporated