![Texas Instruments DM388 Скачать руководство пользователя страница 12](http://html1.mh-extra.com/html/texas-instruments/dm388/dm388_user-manual_1095255012.webp)
Key Features
12
SPRUIC7 – December 2016
Copyright © 2016, Texas Instruments Incorporated
TMDSCSK388 Module
2.1
Key Features
The DM388 module is a high-performance DaVinci™ digital-media signal processor from TI.
•
Up to 1000-MHz ARM
®
Cortex
®
-A8 RISC processor DSP internal memories
•
Imaging subsystem
•
Programmable high-definition video image coprocessing (HDVICP v2) engine
•
HD video processing subsystem (HDVPSS)
•
32-bit DDR2, DDR3, and DDR3L SDRAM interface
–
Supports up to 400 MHz for DDR2, 533 MHz for DDR3, and 533 MHz for DDR3L
–
Up to two × 16 devices, 2GB of total address space
•
Dynamic Memory Manager (DMM)
•
General-Purpose Memory Controller (GPMC)
–
8- or 16-bit multiplexed address and data bus
–
512MB of total address space divided among up to eight chip selects
•
Enhanced direct memory access (EDMA) controller
•
Ethernet switch with dual 10-, 100-, or 1000-Mbps external interfaces (EMAC software)
•
Dual USB 2.0 ports with integrated PHYs
•
One PCI Express 2.0 port with integrated PHY
•
Eight 32-bit general-purpose timers
•
Four serial peripheral interfaces (SPIs), up to 48 MHz
•
Three MMCs, SDs, and SDIO serial interfaces (up to 48 MHz)
•
Four inter-integrated circuit (I
2
C bus) ports
•
Two multichannel audio serial ports (McASP)
•
Four audio tracking logic (ATL) modules
•
On-chip ARM ROM bootloader (RBL)
•
Power, reset, and clock management
•
32KB of embedded trace buffer (ETB) and 5-pin trace interface for debug
•
1.8- and 3.3-V dual voltage buffers for general I/O
The DM388 processor module is a low cost, small form factor, higher performance, easy-to-use system-
on-module. The development platform has the interfaces that can help build application devices:
•
Camera
•
Ethernet
•
HDMI
•
CSI
•
McASP
•
UART
•
I
2
C
•
TVOUT
•
USB