Texas Instruments DLP LightCrafter 6500, Руководство пользователя, Страница: 12 / 60

Other Items Needed for Operation
www.ti.com
12 DLPU028C – October 2014 – Revised November 2016
Submit Documentation Feedback
Copyright © 2014–2016, Texas Instruments Incorporated
DLP LightCrafter 6500 and 9000 Module Overview
The DLP LightCrafter 9000 EVM major components are:
• DLP9000 0.9-inch WQXGA DMD
• FPGA
• 2x DLPC900 Controllers
• 2x 48 MB parallel FLASH contains DLPC900 firmware and pattern images
• Power regulators
• IT6535 digital receiver for HDMI and Display Port Video Input
1.4 Other Items Needed for Operation
The DLP LightCrafter 6500 and 9000 EVMs are flexible, ready-to-use evaluation modules (EVM).
However, the DLP LightCrafter 6500 and 9000 EVMs do not ship with optics, illumination source, cables,
power supplies, or additional hardware components.
• Power supply requirements:
– Nominal voltage: 12-V DC at -5%/+10%
– Typical current: 5 A
– Maximum current: 7 A
– DC connector size:
• Inner diameter: 2.5 mm
• Outer diameter: 5.5 mm
• Shaft: 9.5-mm female, center positive
– Efficiency level: V
– A recommended power supply is Digi-Key part number 271-2718-ND , or equivalent
• USB cable: A to B USB cable
• Optics
• Illumination module