
System Setup
5
SLAU790A – October 2018 – Revised December 2018
Copyright © 2018, Texas Instruments Incorporated
DAC53608 Evaluation Module
Figure 2. Software Installation Path
2.1.3
Analog EVM Controller Firmware Upgrade
The firmware for the Analog EVM Controller needs to be upgraded for the first time before using the
software. A jumper modification needs to be done and the USB cable should be connected to the XDS110
port of the Analog EVM Controller for downloading firmware. The firmware can be downloaded to the
Analog EVM Controller using the online tool
. This link is also provided on the
Setup
page of the
GUI. The firmware bin file can be found at
"<Download
Directory>\DAC53608EVM_1.0.1_installer_win\install_image_DAC53608EVM\DAC53608EVM\firmware\ac
ctrl.0.3.0.3.bin"
after unzipping the file
install_image_DAC53608EVM.zip
.
Follow the step-by-step procedure below to upgrade the firmware and install the device drivers
successfully:
•
Remove jumper JP6 on Analog EVM Controller as shown in step 1 of
•
Mount jumper on
5V-OTG
. The jumper on
5V-XDS
should be retained as shown in step 1 of
•
Connect the USB cable to the port on the XDS110 side of the board as shown in step 2 of
•
Connect the USB cable to PC and open
. Click on
Start Now
in the
Detect Device
section
•
In case the GUI Composer framework is being installed for the first time on the PC, the browser
extension and the
TI Cloud Agent
need to be installed. Follow the 2-step installation flow prompted on
the web page as shown in