Software Installation
2
Software Installation
2.1
Graphical User Interface (GUI)
To use the DAC161S055EVM, install the DAC161S055 software:
1. The DAC161S055 software is located on the
. Go to the product page, scroll down to the
software section, and download the latest evaluation software.
2. Unzip the downloaded file into a known directory, and run the “setup.exe” file located in [Unzip
location]\ DAC161S055\ GUI\ DAC161S055_Installer.zip\DAC161S055_Installer\Installer\Volume.
Follow the popup-screen instructions by clicking the Next button to install the software.
Figure 2. DAC161S055 Installation Directory
3. When the installation is finished, click Finish button.
3
SNAU171 – August 2014
DAC161S055EVM Booster Pack User’s Guide
Copyright © 2014, Texas Instruments Incorporated
