manualshive.com logo in svg

Texas Instruments Chipcon CC2420 ZDK PRO, Руководство пользователя


Поделиться
Скачать
background image

 

                                           

CC2420

 

                                                    

SWRS041B                                                         Page 87 of 89

 

Revision 

Date 

Description/Changes 

1.2 

2004-06-09  Output power range: 24 dB (was 40 dB). 

Deleted option for single ended external PA.  
Adjacent channel rejection corrected to 46 dB for + 5MHz (was 39 dB), 39 dB for –5 
MHz (was 46 dB) 58 dB for +10 MHz (was 53 dB) and 55 dB for-10 MHz (was 57 dB).
 “image channel” deleted in text for In band spurious reception.  
Revision for reference [1] updated. 
CSMA-CA added to abbreviations. 
Schematic view of the IEEE 802.15.4 Frame Format corrected, address field 0 to 20 
bits. 
Changed blocking specifications to relate to EN 300 440 class 2. 
Updated addresses for Chipcon offices. 
Added section Operating Conditions.  
Section RAM access: A6:0 (LSB). 

IOCFG0.BCN_ACCEPT

 bit added and described in section Address recognition and 

the 

IOCFG0

 register.  

The previous IDLE mode has been renamed to power down to be consistent with 
other Chipcon data sheets. Three power modes defined: Voltage regulator off (OFF), 
Power down (PD) (Voltage regulator enabled), IDLE (XOSC running) and used 
throughout the document.  
Default 

TXMIXBUF_CUR[1:0]

 in table for 

TXCTRL

 set to 2.  

Added information: compliance with EN 300 328 og EN 300 440 (Class 2).   
Added more information about 

FIFOP

 in section Receive mode. 

Removed text about SO programmable pull up from entire document.  
In Voltage regulator section of Electrical Specifications: voltage regulator may only 
supply CC2420. 

MANFIDH.VERSION

 register, changed to ”current version is 2”.  

Included package height in package drawing. 
Included layout drawing for package. 
Power supply pins defined clearer in Absolute maximum ratings.  
Third harmonic level corrected to –51dBm in Electrical specifications, second 
harmonic to –37dBm. 
Table with Crystal oscillator component values corrected.  
Link to reference [3] corrected.  
Corrected spelling grammar and references to tables and figures.  
Figure showing SmartRF Studio user interface included. 
Added figure to describe pin activity during RXFIFO read out. 
Added description on how to connect pins when not using internal regulator. 

1.1 2004-03-22 

Application 

circuits: Pin 20 and pin 37 connected to 1.8 V from 

VREG_OUT

. 

IOCFG0.SO_PULLUP

 deleted. 

Added document history table. 

1.0 2003-11-17 

Initial 

release. 

 

42.2  Product Status Definitions 

Data Sheet Identification 

Product Status 

Definition 

Advance Information 

Planned or Under 
Development 

This data sheet contains the design specifications for 
product development. Specifications may change in 
any manner without notice. 

Preliminary Engineering 

Samples 

and First Production 

This data sheet contains preliminary data, and 
supplementary data will be published at a later date. 
Chipcon reserves the right to make changes at any 
time without notice in order to improve design and 
supply the best possible product. 

No Identification Noted 

Full Production 

This data sheet contains the final specifications. 
Chipcon reserves the right to make changes at any 
time without notice in order to improve design and 
supply the best possible product. 

Obsolete 

Not In Production 

This data sheet contains specifications on a product 
that has been discontinued by Chipcon. The data 
sheet is printed for reference information only. 

Содержание Chipcon CC2420 ZDK PRO



























































































Отзывы:

Нет отзывов

Похожие инструкции для Chipcon CC2420 ZDK PRO

Harman Kardon 930 Technical Manual preview
930
Бренд: Harman Kardon Страницы: 15
Icom IC-120 Instruction Manual preview
IC-120
Бренд: Icom Страницы: 28
Harman Kardon AVR 235 Quick Start Manual preview
AVR 235
Бренд: Harman Kardon Страницы: 4
Harman Kardon AVR 225 Quick Start Manual preview
AVR 225
Бренд: Harman Kardon Страницы: 4
Harman Kardon AVR 1510 Quick Start Manual preview
AVR 1510
Бренд: Harman Kardon Страницы: 11
Harman Kardon AVR 135 Owner'S Manual preview
AVR 135
Бренд: Harman Kardon Страницы: 48
Harman Kardon AVR 120 Service Manual preview
AVR 120
Бренд: Harman Kardon Страницы: 118
Harman Kardon AVR 110 Specifications preview
AVR 110
Бренд: Harman Kardon Страницы: 2
Harman Kardon AVR 1650 Quick Start Manual preview
AVR 1650
Бренд: Harman Kardon Страницы: 10
Harman Kardon AVR 145 Brochure & Specs preview
AVR 145
Бренд: Harman Kardon Страницы: 52
Icom ic-2730A Programming Manual preview
ic-2730A
Бренд: Icom Страницы: 2
Icom IC-25A Instruction Manual preview
IC-25A
Бренд: Icom Страницы: 36
Icom IC-2340H Instruction Manual preview
IC-2340H
Бренд: Icom Страницы: 60
Icom IC-2300H Instructions preview
IC-2300H
Бренд: Icom Страницы: 2
Icom ic-f5021 Service Manual preview
ic-f5021
Бренд: Icom Страницы: 38
Icom IC-03AT Instruction Manual preview
IC-03AT
Бренд: Icom Страницы: 48
Icom IC-R72 Service Manual preview
IC-R72
Бренд: Icom Страницы: 57
Icom IC-281H Instruction Manual preview
IC-281H
Бренд: Icom Страницы: 60

Бренды по названию

Популярные бренды

Загрузить еще бренды