Texas Instruments CC3000, Руководство пользователя

Страница: 9 / 19

SWRU331-002
www.ti.com
CC3000 BoosterPack EVM Board Bottom View
2.2 CC3000 BoosterPack EVM Board Bottom View
The two BoosterPack mating connectors (J9 and J10) connect to the host platform and mount to the
bottom of the BoosterPack EVM board, as shown in
Figure 2-2 .
Figure 2-2. CC3000 BoosterPack EVM Board (Bottom View)
Table 2-5 describes the signals on J9.
Table 2-5. Header J9 of the CC3000 BoosterPack EVM Board (Bottom View)
Pin Pin Name Pin Type Descriptions
1 VBAT_IN Power In Battery voltage input to module. For the MSP430 host
platform, VIO_HOST = VBAT_IN. For other platforms
that have different voltage levels from the battery
voltages, R14 can be removed.
2 VBAT_SW_EN Input Active-high enables signal from the host device
3 Reserved – Reserved
4 Reserved – Reserved
5 Reserved – Reserved
6 Reserved – Reserved
7 WL_SPI_CLK Input Host interface SPI clock input
8 Reserved – Reserved
9 Reserved – Reserved
10 Reserved – Reserved
9 SWRU331A – November 2012 – Revised August 2014 CC3000 BoosterPack EVM Board
Submit Documentation Feedback
Copyright © 2012–2014, Texas Instruments Incorporated