Chapter 13: Using the Draw Toolbox 13-9
Copying permitted provided TI copyright notice is included
© 1997, 1999 Texas Instruments Incorporated
New Axes
The
New Axes
tool
creates a new x-y axis defined by three points. The first point defines the origin,
the second point defines the location of the x-axis, and the third point defines the location of the
y-axis. If the axes are defined using existing points, the points determine the scale of the axes.
Otherwise, the scale is defined in one-centimeter increments.
You can define multiple coordinate systems. Equations and coordinates and grids must be
specified relative to a specific coordinate system if multiple coordinate systems are defined.
After defining a new coordinate system, you can manipulate it in the same manner as the default
coordinate system documented in the previous tool,
Show/Hide Axes
.
Creating axes
1.
Select
New Axes
from the
Draw
toolbox.
2.
Designate a point for the origin.
3.
Click to specify the location of the x-axis.
4.
Click to specify the location of the y-axis.
Click to place the origin point.
Click to place the x-axis.
Click to place the y-axis.
