Texas Instruments bq2425xEVM-150, Руководство пользователя

Страница: 1 / 25

User's Guide
SLUUA08A – March 2013 – Revised April 2013
bq2425xEVM-150, Single-Cell Li-Ion Switch-Mode Charger
This user's guide describes the characteristics, operation, and use of the bq24250EVM-150,
bq24251EVM-150, and bq24257EVM-150 evaluation modules (EVM). These EVMs enable test and
evaluation TI's bq24250, bq24251, and bq24257 devices. The bq2425x series are highly integrated,
single-cell, Li-Ion battery chargers targeted for space-limited, portable applications with high-capacity
batteries. This user's guide includes EVM specifications, the schematic diagram, test procedures, test
results, a bill of materials, and board layout.
Contents
1 Introduction
..................................................................................................................
2
2 EVM Considerations
........................................................................................................
3
3 Recommended Operating Condition
.....................................................................................
3
4 Equipment and EVM Setup
................................................................................................
4
4.1 Schematic
...........................................................................................................
4
4.2 I/O Description
......................................................................................................
5
4.3 Test Points
..........................................................................................................
5
4.4 Pin Descriptions
....................................................................................................
6
4.5 Control and Key Parameters Setting
............................................................................
6
5 Test Procedure
..............................................................................................................
7
5.1 Definition
............................................................................................................
7
5.2 Recommended Test Equipment
.................................................................................
7
5.3 Software
.............................................................................................................
7
5.4 Recommended Test Equipment Set Up
........................................................................
8
5.5 Recommended Test Procedure
................................................................................
10
6 Test Results
................................................................................................................
12
6.1 Output Regulation Ripple
........................................................................................
12
6.2 Efficiency Data
....................................................................................................
12
6.3 Thermal Performance
............................................................................................
13
7 Layout and Bill of Materials
..............................................................................................
13
7.1 Printed-Circuit Board Layout Guideline
........................................................................
13
7.2 Layout
..............................................................................................................
14
7.3 Bill of Materials (BOM)
...........................................................................................
20
List of Figures
1 bq2425xEVM-150 Schematic
.............................................................................................
4
2 Original Test Setup
.........................................................................................................
8
3 Battery Emulator
...........................................................................................................
9
4 Connector Kit
................................................................................................................
9
5 Main Window of the bq2425xSW Evaluation Software
...............................................................
10
6 Output Regulation Ripple at ICHG = 1000 mA
.......................................................................
12
7 Output Regulation Ripple at ICHG = 120 mA
.........................................................................
12
8 Efficiency Versus Output Current While in Battery Voltage Regulation (4.2V)”
...................................
12
9 Thermal Image
.............................................................................................................
13
10 bq2425xEVM-150 Top Assembly
.......................................................................................
14
11 bq2425xEVM-150 Top Silkscreen
......................................................................................
15
I
2
C is a trademark of NXP.
1 SLUUA08A – March 2013 – Revised April 2013 bq2425xEVM-150, Single-Cell Li-Ion Switch-Mode Charger
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated