Texas Instruments bq24072RGTR, Руководство пользователя

Страница: 1 / 18

User's Guide
SLVU274C – November 2008 – Revised May 2010
bq24072/3/4/5/9(T) and bq24230/2 1.5-A Single-Chip Li-Ion
and Li-Polymer Charge Management IC EVM
This user’s guide describes the bq24072/3/4/5/9(T) and bq24230/2 ( bqTINY-III™) evaluation module
(EVM). The EVM provides a convenient method for evaluating the performance of a charge management
and system power solution for portable applications using the bq24072/3/4/5/9(T) and bq24230/2 product
families. A completely designed and tested module is presented. The charger is designed to deliver up to
1.5 A of continuous current to the system or charger for one-cell Li-ion or Li-polymer applications (see the
data sheet for correct device) using a dc power supply. The charger is programmed from the factory to
deliver 0.9 A of charging current. This EVM was designed as a stand-alone evaluation module, but it also
can be interfaced with the system and host via the connectors and headers.
Contents
1 Introduction
..................................................................................................................
2
2 Considerations When Testing and Using bq24072/3/4/5/9(T) and bq24230/2 ICs
................................
2
3 Performance Specification Summary
.....................................................................................
3
4 Test Summary
...............................................................................................................
3
5 Schematic
....................................................................................................................
7
6 Physical Layouts
............................................................................................................
8
7 Bill of Materials
.............................................................................................................
11
8 References
.................................................................................................................
14
List of Figures
1 Test Diagram
................................................................................................................
4
2 Modes of Operation Tested in Steps 11 Through 13
..................................................................
6
3 Charger Profile With EN1 = VSS and EN2 = HI, Programmed by ISET
.............................................
6
4 Charge Enabled, Pulled High, Then Low – Disables Charge
.........................................................
7
5 Top Assembly View
.........................................................................................................
8
6 Board Layout – Top Etch Layer
...........................................................................................
9
7 Board Layout – Bottom Etch Layer
.....................................................................................
10
List of Tables
1 Ordering Information
........................................................................................................
2
2 Performance Specification Summary for bq24072/3/4/5/9(T) and bq24230/2 EVMs
..............................
3
3 bq240xx
......................................................................................................................
4
4 HPA282B Bill of Materials
...............................................................................................
11
5 HPA282B Bill of Materials (Continued)
.................................................................................
12
6 HPS252B Bill of Materials
................................................................................................
13
7 HPA502A Bill of Materials
................................................................................................
14
1 SLVU274C – November 2008 – Revised May 2010 bq24072/3/4/5/9(T) and bq24230/2 1.5-A Single-Chip Li-Ion —and Li-Polymer
Charge Management IC EVM
Copyright © 2008–2010, Texas Instruments Incorporated