background image

User's Guide

SLAU598A – December 2014 – Revised July 2015

BOOST-IR Infrared (IR) BoosterPack™ Plug-in Module

The BOOST-IR BoosterPack™ Plug-in Module can be plugged into a LaunchPad™ Development Kit for
simple integration of infrared (IR) transceiver functionality. LaunchPad developers can use this
BoosterPack to start developing remote control applications using the on-board keypad, IR LED
transmitter, and IR re demodulator.

Infrared modulation can be simplified by using on-chip IR Modulation Logic, which can be found on select
MSP430 ultra-low-power microcontrollers within the MSP430FRxx MCU series.

Explore IR communication using the MSP430FR4xx and MSP430FR2xx microcontrollers

TI Designs are also available to help accelerate development using IR transceiver capabilities. These
designs contain documentation, design files, and test data to minimize design overhead.

Download a full reference design leveraging the MSP-EXP430FR4133 LaunchPad and BOOST-IR
BoosterPack

Figure 1. BOOST-IR BoosterPack

BoosterPack, LaunchPad, MSP430, Code Composer Studio, E2E are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.

1

SLAU598A – December 2014 – Revised July 2015

BOOST-IR Infrared (IR) BoosterPack™ Plug-in Module

Submit Documentation Feedback

Copyright © 2014–2015, Texas Instruments Incorporated

Содержание BoosterPack BOOST-IR




























Отзывы: