Texas Instruments Avigo, Руководство пользователя

Страница: 126 / 132

Appendix A: In Case of Difficulty
If you have difficulty using Avigo, the following suggestions may help you correct
the problem.
If: Suggested action:
You cannot see anything on
the display. Locate the
CONTRAST
4
control on the left side of
Avigo. Turn the control toward the arrow to
lighten the display or away from the arrow to
darken the display.
— or —
Be sure that the batteries are installed properly
and that they are fresh.
You have forgotten your
password. Refer to instructions for resetting a forgotten
password in
Chapter 12: Additional Features .
Avigo does not appear to be
working properly. Be sure that the batteries are installed properly
and that they are fresh.
Avigo appears to be “locked
up” and will not respond to
keyboard input.
Press the recessed
Reset
button on the back of
the organizer with a paper clip or other pointed
instrument. After completing
Touch Pad calibration,
a message will appear:
“ Configure your unit? YES deletes all data and resets
memory. NO saves your data. ”
Tap
:
to clear the “lock up” condition as well
as clear all entries from Avigo’s memory.
Tap
;
to clear the “lock up” condition without
clearing entries from Avigo’s memory.
Note:
Tapping ; may result in corrupted data
on Avigo. Back up data frequently to your PC to
minimize loss.
The difficulty persists. Refer to Appendix C for information on
contacting Customer Support to discuss the
problem or to obtain service.
1