Texas Instruments ADS8920BEVM-PDK Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 39

Texas Instruments ADS8920BEVM-PDK Скачать руководство пользователя страница 1

1

SBAU270 – July 2016

Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

ADS8920BEVM-PDK

multiSPI is a registered trademark of Texas Instruments.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
LabVIEW is a trademark of National Instruments.
All other trademarks are the property of their respective owners.

User's Guide

SBAU270 – July 2016

ADS8920BEVM-PDK

This user's guide describes the characteristics, operation, and use of the ADS8920B evaluation module
(EVM) performance demonstration kit (PDK). This kit is an evaluation platform for the

, which is

an 16-bit, 1-MSPS, fully-differential input, successive approximation register (SAR) analog-to-digital
converter (ADC) that features an enhanced serial multiSPI

®

digital interface. The EVM-PDK eases the

evaluation of the ADS8920B device with hardware, software, and computer connectivity through the
universal serial bus (USB) interface. This user's guide includes complete circuit descriptions, schematic
diagrams, and a bill of materials.

The following related documents are available through the Texas Instruments web site at

Related Documentation

Device

Literature Number

1
2
3
...
»

Содержание ADS8920BEVM-PDK








































Отзывы:

Нет отзывов