ADS8350EVM-PDK Initial Setup
5.2
Software Installation
This section presents the steps required to the install the software.
explains how to operate the
software to acquire data.
NOTE:
The ADS8350EVM-PDK with ADS8350 PWB Board revision A includes (1) microSD card.
Ensure the microSD memory card included in the kit is installed in the microSD socket on the
back of the simple capture card board before connecting the EVM to the PC. Otherwise, as a
result of improper boot up, Windows cannot recognize the ADS8350EVM-PDK as a
connected device.
The ADS8350EVM-PDK with ADS8350 PWB Board revision B includes (2) microSD cards.
Ensure both microSD memory cards that contain the software are installed in the microSD
sockets on the back of the simple capture card board and on the back of ADS8350EVM
board respectively. Otherwise, as a result of improper boot up, Windows cannot recognize
the ADS8350EVM-PDK as a connected device.
Complete the following steps to install the software:
Step 1.
Verify the microSD memory card(s) are installed:
•
ADS8350EVM PWB revision A: This PDK kit version includes (1) microSD Card. Verify
the microSD memory card is installed on the simple capture card controller board
•
ADS8350EVM PWB revision B: This PDK kit version includes (2) microSD Cards. Ensure
both microSD memory cards are installed in the microSD sockets on the back of the
simple capture card board and ADS8350EVM board respectively
Step 2.
Verify jumpers are in the factory-default position and connect the hardware.
Step 3.
Install the ADS8350EVM-PDK software.
Step 4.
Complete the simple capture card device driver installation.
Each task is described in the following subsections.
5.2.1
Verify the microSD Memory Card is Installed on the Simple Capture Card Controller Board
The ADS8350EVM-PDK includes the microSD card(s) that contain the EVM software and simple capture
card controller board firmware required for the EVM operation.
NOTE:
Ensure the microSD memory card that contains the software is installed in the microSD
socket (P6) on the back of the simple capture card board.
illustrates the bottom view of the simple capture card controller board with the
microSD card installed.
10
ADS8350EVM-PDK
SBAU218A – April 2014 – Revised October 2014
Copyright © 2014, Texas Instruments Incorporated
