Update USB Driver
Figure 2-3. USB Firmware Upgrade Window
4. Enable the Select Firmware button and browse to open the downloaded firmware adc12xs10x_fw-
v0.92.txt.
5. Press the BSL button on the MSP430 LaunchPad and connect to the PC with a USB cable; if detected,
the text on the Firmware Upgrade tool changes from No device connected to Found 1 device.
6. Click on the Upgrade Firmware button to program the LaunchPad. Close the application when done.
2.3
Update USB Driver
1. Before launching the ADC12xS10x software, connect the ADC121S101EVM board to a USB port of
the PC. Go to the Device Manager and find MSP43-USB Example. Right click and select Update
Driver Software.
7
SNOU131 – July 2014
Software Installation
Copyright © 2014, Texas Instruments Incorporated
