Chapter 2
SNOU131 – July 2014
Software Installation
2.1
Graphical User Interface (GUI)
To use the ADC121S101EVM, install the ADC12xS10x software:
1. If the ADC121S101EVM came from an FAE, the software GUI is in a .zip file. Otherwise, click on
http://www.ti.com/product/adc121s101
, scroll down to the Software section, and download the latest
evaluation software.
2. Unzip the downloaded file into a known directory, and run the setup.exe file located in [Unzip
location]\ADC12xS10x\EVM_GUI\ADC12xS10x_Installer_v11.zip\ADC12xS10x_Installer
\Installer\Volume. Follow the pop-screen instructions by clicking the Next button to install the software.
Figure 2-1. ADC12xS10x Installation Directory
3. When the installation is finished, click the Finish button.
5
SNOU131 – July 2014
Software Installation
Copyright © 2014, Texas Instruments Incorporated