TEXA TMD2, Руководство по установке

Страница: 23 / 41

7.3 Flash codes
The device uses the flashing of the LEDs to indicate its status.
7.3.1 Flashings of LED - [a] and of LED - [b]
The explanation of the correct reading of the flashings of LED - [a] and of
LED - [b] is below.
LED Status
Red - [a]
Off No error.
On --
Slow flashing (1s)
Problem related to the SIM Card: SIM
not present or PIN error.
Fast flashing (200 ms)
Possible hardware problem: contact
Technical Assistance.
Blue - [b]
Off No Bluetooth communication.
On --
Flashing
Device in communication via
Bluetooth.
7.3.2 Flashings of LED - [c] with instrument panel on
LED - [c] may take on two colours: green and red and it may also flash
with different frequencies.
During normal operating conditions, when the device is connecting to the
server to send data, the
LED - [c] will flash 3 times in a continuous cycle.
Each series of flashings is approximately 2 s after the previous one.
The three flashings indicate respectively the status of:
1.
The reception of the position signal from the GPS satellites.
2.
The connection to the GPRS network.
3.
The connection to the TEXA S.p.A. Data Center.
23
en