TEXA TMD2, Руководство по установке

Страница: 14 / 41

3.4 Device Safety
The device was manufactured to be mechanically resistant.
Careless use and excessive mechanical stress could compromise
its efficiency.
Safety Measures:
• Do not drop, shake or knock the device.
• Do not place objects over the cables and do not bend them at a right angle.
• Do not perform any type of intervention that could damage the device.
•
Do not open or disassemble the device.
•
Do not fold the device's antenna.
•
Use the device only with the provided antenna or with one authorized by the
device's manufacturer.
• Make sure the device and the accessories connected to it are firmly secured
before moving the vehicle they are installed on.
The device was manufactured to be electrically safe and to work
with specific power supply voltage levels.
The failure to comply with the specifications related to the power
supply may compromise its efficiency.
Safety Measures:
•
Do not wet the device with water or other liquids.
• If not otherwise specified, use the device on vehicles with a 12/24 V DC
power supply and the chassis connected to the negative pole.
•
The device's power supply must always be connected following the
indications provided in this manual.
• Do not use an external batteries to supply the device.
Electromagnetic compatibility tests on the device guarantee that it
can be adapted to the technologies normally used on vehicles (ex.:
engine check, ABS, airbag, etc.). Nevertheless, if there are
malfunctions, contact the vehicle dealer.
In particular, the correct functioning of the device could be
compromised by covering the antenna with shielding objects and/
or materials.
Such materials force the device to work with more power than
normal.
Safety Measures:
• Do not cover the antenna with shielding objects or materials.
14