TEXA TMD2, Руководство по установке

Страница: 13 / 41

3.3 Operator Safety
The airbags inflate with great force and a device placed in their
expansion area may be projected towards the occupants of the
vehicle causing serious harm and injuries.
Safety Measures:
•
Do not place the device in the expansion areas of any airbag.
The device was manufactured to be electrically safe and insulated.
It is however necessary to reduce the risk of electric shock.
Safety Measures:
•
Make sure the electric power supply devices (auxiliary batteries) are
disconnected and that they remain so during the entire installation before
proceeding with the installation itself.
• Do not touch the device, the accessories and the wiring with wet hands.
• If liquid should penetrate inside the device, immediately disconnect the
power supply wiring and contact technical assistance.
The device's antenna was manufactured to result be electrically
safe and mechanically resistant.
However, if the antenna is damaged in some way, the contact with
skin could cause light burns.
Safety Measures:
•
Do not use the accessory device if the antenna is damaged.
•
Do not touch the antenna with bare hands.
•
Immediately contact technical assistance.
13
en