7
IMPORTANT!
Connect the AC cord only after the speakers, antenna and all optional equipment have been connected.
Never make or change any connections with the power switched on.
The rating plate is located at the rear panel of the system.
1.
FM Antenna Input Connections
For FM reception, connect the FM antenna to the FM jack. Move the antenna in various directions until the
clearest signal is received.
Note: Position the antenna as far away as possible from a TV, VCR or other radiation source.
2.
Audio inputs
Connect audio (Left and Right) cables from a VCR, TV or satellite receiver to play them through this home
theatre system. These connections are labelled
AUX1
and
AUX2
and are selected by using the
SOURCE
button on the front panel or
TUNER/AUX
button on the remote control.
3.
Video inputs
Connect video cables from the corresponding video output jacks on a TV, VCR, or satellite receiver to play
them through this home theatre system. These connections are labelled
AUX1
and
AUX2
and are selected by
using the
SOURCE
button on the front panel or
TUNER/AUX
button on the remote control.
4.
Video output
- REC
Connect to the Video Input of a television or you can also connect a VCR or other recording device to this
jack. Most DVDs cannot be recorded, however you can use this connection to record from the auxiliary
inputs such as recording from the satellite receiver.
5.
Audio outputs - REC
Connect to the Audio Input of a television or you can also connect audio (Left and Right) cables to external
recording devices such as a VCR or cassette recorder.
6.
Component video and progressive outputs
Connect a television that has component video input. Use a component video cable (not supplied).
7.
Digital coaxial output
Connect an external device that has a digital audio input jack.
8.
S - Video output
Connect to the S-VIDEO IN jack on the television using an S-Video cable. This type of connection provides
superior picture quality to the Composite (yellow) Video Output.
Note: Your television must be equipped with an S-Video input jack.
9.
Surround speaker
Connect the left surround speaker to the
SL
terminals and right surround speaker to the
SR
terminasl.
Connect the coloured wire to the same coloured terminal and black wire to the black terminal.
10. Subwoofer speaker
Connect the supplied (passive) subwoofer, with the coloured wire attached to the purple terminal and the
black wire attached to the black terminal.
11. Centre speaker
Connect the centre speaker, with the coloured wire attached to the green terminal and the black wire attached
to the black terminal.
12. Front speaker
Connect the left front speaker to the
L
terminals and right front speaker to the
R
terminals. Connect the
coloured wire to the same coloured terminal and black wire to the black terminal.
13. Active subwoofer out
If connecting an active subwoofer (not supplied) connect to this socket.
14. Power Cord
Plug into a household electrical outlet corresponding to the voltage listed on the Rating Label.
