TEUPEN LEO 27T страница 71 Скачать руководство пользователя

Страница: 71 / 312

Operation

07/05/2018

Operation

7.1

Safety instructions for operation

Improper operation

WARNING

Risk of injury due to improper operation!

Improper operation can cause severe injuries and significant property damage.

–

Execute all operating steps according to the details and instructions in these
instructions.

–

Always perform any work as a pair, with the help of a second person.

–

Prior to starting any work, ensure all covers and safety devices are installed
and in full working order.

–

Never take safety devices out of service or bypass during operation.

–

Make sure that there are no persons in the danger zone.

7.2

Connecting the machine to the mains supply

Personnel:

Trained persons

Protective equipment:

Occupational safety clothing

Safety boots

Safety helmet

Electrical current

DANGER

Risk of fatal injury due to electrical current!

There is a direct risk of fatal injury due to electric shock in case of contact with live
parts. Damage to the insulation or individual components may represent a risk of
fatal injury.

–

In case of damage to the insulation, switch off the voltage supply immediately
and have the machine repaired.

–

Before performing work on live parts, pull the mains plug.

–

Never bypass or disable any fuses or circuit breakers. When changing fuses
or circuit breakers, make sure that the ampere rating is correct.

–

Keep moisture away from parts which are live with voltage. It may cause a
short-circuit.

Содержание LEO 27T

























































































































































































































































































































Результаты поиска

Содержание LEO 27T

Отзывы:

Похожие инструкции для LEO 27T

Бренды по названию

Популярные бренды

TEUPEN LEO 27T, Перевод инструкции по эксплуатации

Результаты поиска

Содержание LEO 27T

Отзывы:

Похожие инструкции для LEO 27T

Бренды по названию

Популярные бренды