TEUPEN LEO 27T, Перевод инструкции по эксплуатации

Страница: 57 / 312

Construction and function
07/05/2018 57
5.3.5 Control box control panels
1
2
3
4
5
6
9 10 11
7
8
Fig. 40
1 - toggle switch for height
limiter (accessories) The height limiter toggle switch allows you to set three different working heights.
2 - battery indicator Indicates the battery capacity.
3 - emergency-stop button There is an emergency-stop button on the control box. When it has been actuated,
it has to be released by pulling or turning it in order to make the machine ready for
operation again.
4 - strobe lights toggle
switch (accessories) Switches the strobe lights on/off
5 - spotlights toggle switch
(accessories) Switches the spotlights on the drive unit and lift boom holder on/off
6 - illuminated start/stop
button Is used to start and stop the combustion engine.
NOTICE
If the machine features a LI-ION drive, the illuminated button switches between
battery and mains power.
7 - standby lamp Shows standby status (on or off).
8 - ignition key switch The ignition key switch enables supplying voltage to the controls.
9 - telescopic boom up (op-
tional) Raises the telescopic boom to allow adjustments to be made to the mount.
10 - telescopic boom down
(optional) This button moves the telescopic boom, basket boom and working basket into
transport position.
11 - graphic display screen The graphic display screen shows the movements available with the respective
functions as well as machine data, such as operating hours etc. If an impermissible
movement is selected, warnings and information messages are shown. The display
is also where fault codes and fault descriptors are shown.